Fabric Banner

Hems are highly recommended for this product. Ordering without hems will run the risk of the grommets tearing out of the material especially on larger banners.

Hems consist of one inch of the vinyl banner material folded over to the backside of the banner and heated together to form a clean and strong one-inch hem.

The hems increase the strength and durability of the banner.

Grommets are metal rings inserted into holes through vinyl material, collared on each side to keep them held securely in place.

They are used to prevent tearing or abrasion of material from the support line being routed through the holes in the vinyl material.

Pole Pockets consist of either 2 inches or 4 inches of material wrapped around the sides, top or bottom of the banner. The vinyl banner material is folded over the backside of the banner similar to hems, but there is room for a pole or rod to go through the pocket. The material is heat welded onto the backside of the banner which creates a smooth 2-inch or 3-inch seam. Please note the pole pockets are finished at the size dimensions of the banner size selected - not in addition.